Users Guide

Situation Command Output
SD card in the active CMC
module that is not bound to any
service tag.
$racadm featurecard -s
The feature card inserted
is valid and contains the
following feature(s)
FlexAddress:not bound
FlexAddress feature not active on
the chassis for any reason (No SD
card inserted/ corrupt SD card/
after feature deactivated /SD card
bound to a different chassis).
$racadm setflexaddr [-f
<fabricName> <slotState>]
$racadm setflexaddr [-i
<slot#> <slotstate>]
ERROR: Flexaddress
feature is not active on
the chassis
Guest user attempts to set
FlexAddress on slots/fabrics.
$racadm setflexaddr [-f
<fabricName> <slotState>]
$racadm setflexaddr [-i
<slot#> <slotstate>]
ERROR: Insufficient user
privileges to perform
operation
Deactivating FlexAddress feature
with chassis powered ON.
$racadm feature -d -c
flexaddress
ERROR: Unable to
deactivate the feature
because the chassis is
powered ON
Guest user tries to deactivate the
feature on the chassis.
$racadm feature -d -c
flexaddress
ERROR: Insufficient user
privileges to perform
operation
Changing the slot/fabric
FlexAddress settings while the
server modules are powered ON.
$racadm setflexaddr -i 1
1
ERROR: Unable to perform
the set operation because
it affects a powered ON
server
Changing the Flexaddress
settings of slot or fabric, when
the CMC Enterprise License is
not installed.
$racadm setflexaddr -
i<slotnum> <status>
$racadm setflexaddr -
f<FabricName> <status>
ERROR: SWC0242 : A
required license is
missing or expired.
Obtain an appropriate
license and try again, or
contact your service
provider for additional
details.
NOTE: To resolve this issue,
you must have a
FlexAddress Enablement
license.
FlexAddress DELL SOFTWARE LICENSE AGREEMENT
This is a legal agreement between you, the user, and Dell Products L.P. or Dell Global B.V. ("Dell"). This
agreement covers all software that is distributed with the Dell product, for which there is no separate
license agreement between you and the manufacturer or owner of the software (collectively the
"Software"). This agreement is not for the sale of Software or any other intellectual property. All title and
intellectual property rights in and to Software is owned by the manufacturer or owner of the Software. All
rights not expressly granted under this agreement are reserved by the manufacturer or owner of the
Software. By opening or breaking the seal on the Software packet(s), installing or downloading the
Software, or using the Software that has been preloaded or is embedded in your product, you agree to be
157