Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.30 for Dell PowerEdge FX2
81828384858687888990
3. Click OK to apply the profile to the chassis.
Exporting Chassis Configuration Profiles
You can export chassis configuration profiles that are saved on the network share to a specified path on a
management station.
To export a stored profile, perform the following tasks:
1. Go to the Chassis Configuration Profiles page. In the Chassis Configuration Profiles → Stored
Profiles section, select the required profile and then click Export Copy of Profile.
A File Download message is displayed prompting you to open or save the file.
2. Click Save or Open to export the profile to the required location.
Editing Chassis Configuration Profiles
You can edit chassis configuration profile name of a chassis.
To edit a chassis configuration profile name, perform the following tasks:
1. Go to the Chassis Configuration Profiles page. In the Chassis Configuration Profiles → Stored
Profiles section, select the required profile and then click Edit Profile.
The Edit Profile window is displayed.
2. Enter a desired profile name in the Profile Name field and click Edit Profile.
Operation Successful message is displayed.
3. Click OK.
Deleting Chassis Configuration Profiles
You can delete a chassis configuration profile that is stored on the network share.
To delete a chassis configuration profile, perform the following tasks:
1. Go to the Chassis Configuration Profiles page. In the Chassis Configuration Profiles → Stored
Profiles section, select the required profile and then click Delete Profile.
A warning message is displayed indicating that deleting a profile would delete the selected profile
permanently.
2. Click OK to delete the selected profile.
Configuring Multiple CMCs through RACADM Using
Chassis Configuration Profiles
By using chassis configuration profiles, you can export the chassis configuration profiles as an XML file
and import it to another chassis.
Use RACADM get command for export operation and set command for import operation.
NOTE: By default, the export is done as clone type. You can use the –—clone to get the clone type
profile in XML file.
You can export chassis profiles (XML files) from CMC to the network share or to a local management
station and import chassis profiles (XML files) from the network share or from a local management
station.
81