Users Guide

• 1 — Enable
• 0 — Disable
To enable a PCIe reassignment, run the following command:
racadm config –g cfgPCIe –o cfgPCIeReassignmentEnable 1
To disable a PCIe reassignment, run the following command:
racadm config –g cfgPCIe –o cfgPCIeReassignmentEnable 0
For more information, see the Dell Chassis Management Controller for PowerEdge FX2/FX2s RACADM
Command Line Reference Guide available at dell.com/support/Manuals.
170