Release Notes

• Microsoft Internet Explorer 11
• Safari version 7.1
• Safari version 8.0
• Mozilla Firefox version 32
• Mozilla Firefox version 33
• Google Chrome version 41
• Google Chrome version 42
What’s New
• Firmware and driver refresh of COMMs cards on Dell's 13th generation of PowerEdge servers.
• Capture and replicate chassis configurations through XML, based on the Chassis Configuration
Profile.
• Support for blinking server identification LED from Quick Link on the Homepage.
• Backup or restore through XML, based on the Chassis Configuration Profile.
• Create and deploy a library of Boot Identity Profiles (boot from iSCSI/SAN configurations) to
enable quick restore of workload to a spare server.
• Populate iDRAC DNS setting from the CMC Quick Deploy page.
• Display iDRAC DNS name as the slot name.
• Option to view iDRAC LCLog results directly in CMC after applying a Server Configuration Profile.
• Support for Secure IOM mode. Secure IOM provides additional CMC security to support IOMs
running in UC-APL secured environments.
• Support for launching IOA GUI on the Homepage and I/O Module overview page.
Fixes
• Fixed an issue with the “getmacaddress –m <server> –t iscsi” command displaying non-iSCSI
MAC addresses after using the iSCSI filter.
• Fixed an issue with the External Storage expansion where chassis logs and alerts are not
generated.
Important Notes
• CMC network default setting is Static with IP address of "192.168.0.120". Complete the CMC
network setup by directly connecting a client system on the same network. For more information,
see the Chassis Management Controller for PowerEdge FX2 Version 1.30 User's Guide available at
dell.com/support/manuals .
• Connecting the STK/Gb2 port of the CMC, located at the back of the chassis, to the management
network can cause network disruption if not properly cabled and configured in CMC. Before using
the STK/Gb2 port of the CMC, see the PowerEdge FX2 Version 1.30 Owner's Manual available at
dell.com/support/manuals.
• The PCIe cards are allocated to sleds based on the sled type, for more information, see the
Chassis Management Controller for PowerEdge FX2 Version 1.30 User's Guide available at
dell.com/support/manuals. This is applicable to Dell PowerEdge FX2s chassis.
• Some advanced features require CMC enterprise license. For more information about the CMC
licenses, see the Chassis Management Controller for PowerEdge FX2 Version 1.30 User's Guide
available at
dell.com/support/manuals .
• Storage features using Storage Sleds require a storage license. For more information about
storage licenses, see the Chassis Management Controller for PowerEdge FX2 Version 1.30 User's
Guide available at dell.com/support/manuals .