Reference Guide
• Enable system to display host names (1=Hostname):
racadm setslotname -h 1
setsysinfo
Description Sets the name or location of the chassis.
To use this subcommand, you must have the Administrator privilege.
NOTE: The special characters " (double quote), ` (back quote), &(ampersand), and \
(backslash) are not supported for this subcommand.
Synopsis
racadm setsysinfo [-c chassisname|chassislocation] <string>
Input
• < string > — Indicates a maximum of 64 non-extended ASCII chassis name or location.
• -c — Sets the chassis name or location.
Example
racadm setsysinfo -c chassisname "Dell Rack System"
The chassis name was set successfully.
SSH or Telnet RACADM
• racadm getconfig -g <groupname> [-o <objectname>][-i <indexnumber>]
• racadm <subcommand>
Example
• racadm getconfig -g idracinfo
• racadm getsysinfo
sshpkauth
Description
Enables you to upload and manage up to four dierent SSH public keys per user. You can upload
a key le or key text, view keys, or delete keys.
RSA key size should be between 768 and 4096 and the recommended DSA key size is 1024.
This command has three mutually exclusive modes—upload, view, and delete that are
determined by the options.
Upload
The upload mode allows you to upload a keyle or to copy the key text on the command line. You
cannot upload and copy a key at the same time.
Remote RACADM:
racadm sshpkauth -i <2 to 16> -k <1 to 4> -f <filename>
racadm sshpkauth -i <2 to 16> -k <1 to 4> -t
<key-text>
Telnet/ssh/serial RACADM:
racadm sshpkauth -i <2 to 16> -k <1 to 4> -t
<key-text>
76