Reference Guide

To use this subcommand, you must have the Execute Diagnostic Commands permission.
Synopsis
racadm netstat
Input
racadm netstat
Output
Kernel IPv6 routing table
Destination Next
Hop Flags Metric Ref Use Iface
::
1/128 ::
U 0 30 1 lo
fe80::200:ff:fe00:d01/128 ::
U 0 0 1 lo
fe80::/64 ::
U 256 0 0 eth1
ff00::/8 ::
U 256 0 0 eth1
Kernel IP routing table
Destination Gateway Genmask Flags MSS
Window irtt Iface
192.168.161.0 0.0.0.0 255.255.255.0 U 0
0 0 bond0
0.0.0.0 198.168.161.1 0.0.0.0 UG 0
0 0 bond0
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign
Address State
tcp 0 0 127.0.0.1:8195
127.0.0.1:52887 ESTABLISHED
tcp 0 0 127.0.0.1:199
127.0.0.1:52174 ESTABLISHED
tcp 0 0 127.0.0.1:52175
127.0.0.1:199 ESTABLISHED
tcp 0 0 127.0.0.1:199
127.0.0.1:52175 ESTABLISHED
tcp 0 0 192.168.155.10:22
192.168.155.20:45106 ESTABLISHED
tcp 0 0 127.0.0.1:52174
127.0.0.1:199 ESTABLISHED
tcp 0 0 127.0.0.1:52887
127.0.0.1:8195 ESTABLISHED
ping
Description
Veries that the destination IP address is reachable from CMC with the current routing-table
contents. A destination IP address is required. An ICMP echo packet is sent to the destination IP
address based on the current routing-table contents.
To use this subcommand for CMC, you must have the Administrator privilege for CMC.
Synopsis
racadm ping <ipaddress>
64