Reference Guide

IPv6 settings:

IPv6 Enabled = 0

DHCP6 Enabled = 1

IP Address 1 = ::

Gateway = ::

Link Local Address = ::

IP Address 2 = ::

IP Address 3 = ::

IP Address 4 = ::

IP Address 5 = ::

IP Address 6 = ::

IP Address 7 = ::

IP Address 8 = ::

IP Address 9 = ::

IP Address 10 = ::

IP Address 11 = ::

IP Address 12 = ::

IP Address 13 = ::

IP Address 14 = ::

IP Address 15 = ::

LOM Status:

NIC Selection = Dedicated

Link Detected = Yes

Speed = 10Mb/s

Duplex Mode = Half Duplex

getpbinfo

Description

Displays power budget status information.

To use this subcommand, you must have the CMC Login User privilege.

Synopsis

racadm getpbinfo

Example

racadm getpbinfo

[Power Budget Status]

System Input Power = 90 W

Peak System Power = 93 W

Peak System Power Timestamp = 20:28:32 03/04/2014

Minimum System Power = 83 W

Minimum System Power Timestamp = 20:28:02 03/04/2014

Overall Power Health = OK

Redundancy = Yes

System Input Power Cap = 3371 W

Redundancy Policy = Redundancy Alerting Only