Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.30 for Dell PowerEdge FX2
41424344454647484950
DHCP Enabled = 1
IP Address = 192.168.0.18
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
IPv6 Enabled = 0
Autoconīš‚guration Enabled = 0
Link local Address =
IPv6 Gateway = ::
VLAN Enable = 0
VLAN ID = 1
VLAN priority = 0
racadm getniccfg -m switch-1
DHCP Enabled = 1
IP Address = 192.168.0.12
Subnet Mask = 255.255.255.0
Gateway = 0.0.0.0
Output
The getniccfg subcommand displays an appropriate error message if the operation is not successful. Otherwise, the output is
displayed in the following format:
IPv4 settings:
NIC Enabled = 1
IPv4 Enabled = 1
DHCP Enabled = 1
IP Address = 192.168.0.12
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
46