Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.30 for Dell PowerEdge FX2

where –m must be one of the following values:

• chassis

: default state if -m is not specied

• server-n

: where n = 1 to 4

•

switch-n

: where n = 1 or 2

Example

racadm getniccfg

NIC Enabled = 1

IPv4 Enabled = 1

DHCP Enabled = 1

Static IP Address = 192.168.0.120

Static Subnet Mask = 255.255.255.0

Static Gateway = 192.168.0.1

Current IP Address = 192.168.0.12

Current Subnet Mask = 255.255.254.0

Current Gateway = 192.168.0.1

IPv6 Enabled = 0

Autoconguration Enabled = 1

Static IPv6 Address = ::/64

Static IPv6 Gateway = ::

Link Local Address = ::

Current IPv6 Address 1 = ::

Current IPv6 Gateway = ::

Speed = Autonegotiate

Duplex = Autonegotiate

VLAN Enable = 0

VLAN ID = 1

VLAN priority = 0

racadm getniccfg -m server-1

LOM Model Name = BRCM 10GbE 2P 57810s bNDC

LOM Fabric Type = 10 GbE KR

IPv4 Enabled = 1

45