Reference Guide

getsleduplinkstatus
Description
Displays multi-node sled network switch uplink status.
Synopsis
racadm getsleduplinkstatus
Examples
racadm getsleduplinkstatus
Sled No : 2
Port No = 3
A1 Link Status = Up
A2 Link Status = Down
Port No = 4
A1 Link Status = Up
A2 Link Status = Up
Sled No : 3
Port No = 5
A1 Link Status = Up
A2 Link Status = Down
Port No = 4
A1 Link Status = Up
A2 Link Status = Up
getexaddr
Description
Displays enabled or disabled status for the entire chassis. If used with -i, the command displays
MACs/WWN on a per-slot–basis.
The decoder values in the Type column indicate the protocols of the network cards:
• 0— Unsupported
• 1— ISCSI
• 2— FCoE-FIP
• 3— iSCSI/FCoE-FIP
To use this subcommand, you must have CMC Login User privilege.
NOTE: If FlexAddress is not activated on the chassis, the command displays server-
assigned MAC/WWN addresses. If the slot is empty, the command leaves the server-
assigned MAC/WWN addresses blank. If an external console controls the MAC/WWN
addresses, the command displays an externally managed message.
Synopsis
racadm getflexaddr [-i <slotNum>]
Input -i < slotNum > — Species the slot information to be displayed. < slotNum > must be from 1 to 4.
Example
Display current FlexAddress settings for all the slots and fabrics.
racadm getflexaddr
<Slot#> <Status> <Server Presence>
1a Enabled Present
35