Reference Guide

• Signed CMC Firmware Image:
racadm fwupdate –g –u –a <TFTP IP> -d <Firmware Path> -m
Firmware update has been initiated. This update process may
take Several minutes to complete.
racadm fwupdate –s –m cmc-active
Invalid firmware: The uploaded firmware image does not contain
A verification signature.
The following table describes the rmware update methods supported for each interface.
FW Update Method CMC
Local RACADM
No
Local RACADM - TFTP
No
Local RACADM - FTP
No
Remote RACADM
Yes
Remote RACADM-TFTP
Yes
Remote RACADM-FTP
Yes
Firmware RACADM-TFTP
Yes
Firmware RACADM-FTP
Yes
get
Description
Saves CMC conguration properties or CMC Event Filter congurations to a le.
NOTE: If CMC is not in the network, you cannot export the chassis conguration prole
to a remote network share with proxy using the get command. But, you can export the
chassis conguration prole to the local management station.
Synopsis
racadm get -f <filename>
racadm -r <CMC IP> -u <username> -p <password> get -f <filename>
racadm -r <CMC IP> -u <username> -p <password> get -f <filename> -t
xml
racadm get -f <filename> -t xml -u <username> -p <password> -l
<CIFS share>
racadm get -f <filename> -t xml -l <NFS share>
Input
• –f: save event lter congurations to a le.
• -u: username of the remote share where the le must be exported.
• -p: password for the remote share where the le must be exported.
• -l: network share location where the le must be exported.
• -t: specify the le type that has to be exported. Valid value is “XML”.
• --clone: export the cloned conguration le. Only the XML le format is supported. The
conguration le can be exported to a local or remote share.
30