Reference Guide

chassislog clear
Description
Deletes the data in the chassis log.
To clear the chassis log, you must have the Clear Logs Administrator privilege.
Synopsis
racadm chassislog clear racadm -r <cmcip> -u <cmc username> -p <cmc
password> chassislog clear
Example
• Clear the Chassis Log
racadm chassislog clear
• Clear the Chassis Log using remote racadm
racadm -r 192.168.0.1 -u root -p <default root user password>
chassislog clear
NOTE: The default local account credential is root (user name) and calvin (user
password).
chassisaction
Description Executes a power action on the chassis or a switch.
To use this subcommand, you must have the Chassis Control Administrator privilege.
Synopsis
racadm chassisaction [-m <module>] <action>
Input
• -m <module> — Module on which you want to carry out the action. Values are:
– chassis - this is the default value, if -m is not specied.
– switch-n, where n=1 to 2
• <action> — Action that you want to execute on the specied module. Values are:
– powerdown — (Chassis only) Turns o the chassis.
– powerup — (Chassis only) Turns on the chassis.
– powercycle — Power cycles the module.
– nongraceshutdown — (Chassis only) Non-gracefully turns o the chassis.
– reset — Performs a hard reset of the module.
When < module > = switch, < action > must be powercycle or reset.
Output None
Example Perform a reset of switch-1:
racadm chassisaction -m switch-1 reset
Module power operation successful.
closessn
Description
Closes a communication session on the device. Use the getssninfo command to view a list
of sessions that can be closed using this command.
21