Reference Guide
If both IPv4 and IPv6 are enabled on the CMC, IPv6 DNS servers take priority. The order of preference for DNS servers is:
• cfgIPv6DNSServer1
• cfgIPv6DNSServer2
• cfgDNSServer1
• cfgDNSServer2
cfgCurrentLanNetworking (Read Only)
This group displays the current CMC NIC properties.
Use this object with the getcong subcommand.
To use this object property, you must have the CMC Login User privilege.
Synopsis
racadm getconfig -g cfgCurrentLanNetworking
cfgNicCurrentIpAddress
Description Displays the IP address the CMC is currently using.
Legal Values Valid IPv4 addresses. For example: 192.168.0.20.
cfgNicCurrentNetmask
Description
Displays the subnet mask the CMC is currently using.
Legal Values Valid IPv4 addresses. For example: 192.168.0.20.
cfgNicCurrentGateway
Description
Displays the Gateway address the CMC is currently using.
Legal Values Valid IPv4 addresses. For example: 192.168.0.20.
cfgNicCurrentDhcpWasUsed
Description
Indicates whether DHCP is used to congure the NIC.
Legal Values 0 – address is static.
1– address was obtained from the DHCP server.
Default None
cfgNicCurrentVlanEnable (Read Only)
Description
Indicates whether the VLAN is enabled.
Legal Values 0- VLAN is disabled
127