Reference Guide
To use this object property, you must have the Chassis Conguration Administrator privilege.
The following sections provide information about the objects in the cfgChassisPower group.
NOTE: While conguring chassis power from a le, update the value for one chassis power cap property and remove the
values for the other chassis power cap properties or, update the last percentage value as it is applicable to all chassis
power cap properties. The chassis power cap properties are: cfgChassisPowerCap, cfgChassisPowerCapF,
cfgChassisPowerCapBTU, cfgChassisPowerCapFBTU, cfgChassisPowerCapPercent, and
cfgChassisPowerCapFPercent.
cfgChassisInPower (Read Only)
Description Indicates the cumulative input power consumption data (in Watts and BTU/hr) captured from all
healthy and functional PSUs in the chassis.
Legal Values None
Default None
cfgChassisPeakPower (Read Only)
Description The maximum system input power consumption (in Watts), because the value was last cleared by
a user.
Legal Values None
Default None
cfgChassisPeakPowerTimestamp (Read Only)
Description
The timestamp recorded when the peak input power consumption value occurred.
Legal Values
Default
cfgChassisMinPower (Read Only)
Description
The minimum system input power consumption value (in Watts) over the time since the value
was last cleared.
Legal Values None
Default None
cfgChassisMinPowerTimestamp (Read Only)
Description
The timestamp recorded when the minimum system power occurred.
Legal Values None
Default None
119