Users Guide

• Empty slots and extension slots (including full height and double width server modules).
Saving Server Inventory Report
To save the server inventory report using the CMC web interface:
1. In the left pane, select the Group.
2. On the Chassis Group Health page, click Save Inventory Report. The File Download dialog box is displayed asking
you to open or save the file.
3. Click Save and specify the path and file name for the server module inventory report.
NOTE: The chassis group leader and chassis group member chassis, and the server module in the associated
chassis, must be turned on to get the most accurate server module inventory report.
Exported Data
The server inventory report contains data that was most recently returned by each Chassis Group member during the
Chassis Group leader’s normal polling (after every 30 seconds).
To get the most accurate server inventory report:
• The Chassis Group leader chassis and all Chassis Group member chassis must be in Chassis Power State On.
• All servers in the associated chassis must be turned on.
The inventory data for the associated chassis and servers may be missing in inventory report, if a subset of the Chassis
Group member chassis are:
• In Chassis Power State Off state
• Turned off
NOTE: If a server is inserted while the chassis is turned off, the model number is not displayed anywhere in
the web interface until the chassis is turned on again.
The following table lists the specific data fields and specific requirements for fields to be reported for each server:
Table 6. Server Module Inventory Field Descriptions
Data Field Example
Chassis Name Data Center Chassis Leader
Chassis IP Address 192.168.0.1
Slot Location 1
Slot Name SLOT-01
Host Name Corporate Webserver
NOTE: Requires a Server Administrator agent
running on the Server; otherwise shown as blank.
Operating System Windows Server 2008
NOTE: Requires a Server Administrator agent
running on the Server; otherwise shown as blank.
Model PowerEdgeM610
Service Tag 1PB8VF1
82