Users Guide

Configuring Services Using CMC Web Interface

To configure CMC services using CMC web interface:

1. In the left pane, click Chassis Overview, and then click Network → Services. The Services Management page is

displayed.

2. Configure the following services as required:

– CMC Serial

– Web Server

– SSH

– Telnet

– Remote RACADM

– SNMP

– Remote Syslog

For information about the fields, see the

Online Help

3. Click Apply, and then update all default time-out and maximum time-out limits.

Configuring Services Using RACADM

To enable and configure the various services, use the following RACADM objects:

• cfgRacTuning

• cfgRacTuneRemoteRacadmEnable

For more information about these objects, see the

Chassis Management Controller for PowerEdge VRTX RACADM

Command Line Reference Guide

available at dell.com/support/manuals.

If the firmware on the server does not support a feature, configuring a property related to that feature displays an error.

For example, using RACADM to enable remote syslog on an unsupported iDRAC displays an error message.

Similarly, when displaying the iDRAC properties using the RACADM getconfig command, the property values are

displayed as N/A for an unsupported feature on the server.

For example:

$ racadm getconfig -g cfgSessionManagement -m server-1

# cfgSsnMgtWebServerMaxSessions=N/A

# cfgSsnMgtWebServerActiveSessions=N/A

# cfgSsnMgtWebServerTimeout=N/A

# cfgSsnMgtSSHMaxSessions=N/A

# cfgSsnMgtSSHActiveSessions=N/A

# cfgSsnMgtSSHTimeout=N/A

# cfgSsnMgtTelnetMaxSessions=N/A

# cfgSsnMgtTelnetActiveSessions=N/A

# cfgSsnMgtTelnetTimeout=N/A

Configuring CMC Extended Storage Card

You can enable or repair the optional Removable Flash Media for use as an extended non-volatile storage. Some CMC

features depend on extended nonvolatile storage for their operation.