Users Guide

Viewing Health Status and Information for Individual Server

To view health status for individual servers, do any of the following:

1. Go to Chassis Overview → Properties → Health .

The Chassis Health page displays a graphical overview of all the servers installed in the chassis. Server health

status is indicated by the overlay of the server subgraphic. Move the cursor to hover over an individual server

subgraphic. A corresponding text hint or screen tip provides additional information for that server. Click the server

subgraphic to view the I/O Module information on the right. For more information, see the

Online Help

2. Go to Chassis Overview and expand Server Overview in the left pane. All the servers (1–4) appear in the expanded

list. Click the server (slot) you want to view.

The Server Status page (separate from the Servers Status page) provides the health status of the server in the

chassis and a launch point to the iDRAC web interface, which is the firmware used to manage the server. For more

information, see the

Online Help

NOTE: To use the iDRAC web interface, you must have an iDRAC user name and password. For more

information about iDRAC and the using the iDRAC web interface, see the

Integrated Dell Remote Access

Controller User’s Guide

Viewing Information and Health Status of the IOM

To view health status of the IOMs, in the CMC Web interface, do any of the following:

1. Click Chassis Overview .

The Chassis Health page is displayed. The graphics in the left pane displays the rear, front, and side view of the

chassis and contains the health status for the IOM. IOM health status is indicated by the overlay of the IOM sub-

graphic. Move the cursor over the individual IOM sub-graphic. The text hint provides additional information about

that IOM. Click the IOM sub-graphic to view the IOM information in the right pane.

2. Go to Chassis Overview → I/O Module Overview .

The I/O Module Status page provides an overview of IOM associated with the chassis. For more information, see

the

Online Help

Viewing Information and Health Status For Individual I/O Module

To view health status of the individual I/O Modules, in the CMC web interface, do any of the following:

1. Go to Chassis Overview → Properties → Health .

The Chassis Health page is displayed. The lower section of Chassis Graphics depicts the rear view of the chassis

and contains the health status for the I/O Modules. I/O Module health status is indicated by the overlay of the I/O

Module subgraphic. Move the cursor to hover over the individual I/O Module subgraphic. The text hint provides

additional information on that I/O Module. Click the I/O Module subgraphic to view the I/O Module information on

the right.

2. Go to Chassis Overview and expand I/O Module Overview in the system tree. All the I/O Modules (1–6) are

displayed in the expanded list. Click the I/O Module (slot) you want to view.

The I/O Module Status page (separate from the overall I/O Module Status page) specific to the I/O Module slot is

displayed. For more information, see the

Online Help