Users Guide

Updating I/O Module Infrastructure Device Firmware Using CMC Web Interface
To update the I/O Module Infrastructure device firmware, in the CMC web interface:
1. Go to Chassis Overview → I/O Module Overview → Update .
The IOM Firmware and Software page is displayed.
Alternatively, go to any of the following:
– Chassis Overview → Update
– Chassis Overview → Chassis Controller → Update
The Firmware Update page is displayed, which provides a link to access the IOM Firmware and Software page.
2. In the IOM Firmware and Software page, in the IOM Firmware section, select the check box in the Update column
for the I/O Module you want to update the firmware and click Apply Firmware Update .
The Update Status section provides firmware update status information. A status indicator displays on the page
while the image file uploads. File transfer time varies based on connection speed. When the internal update
process begins, the page automatically refreshes and the Firmware update timer is displayed.
NOTE: Do not click the Refresh icon or navigate to another page during the file transfer.
NOTE: The file transfer timer is not displayed when updating IOMINF firmware.
When the update is complete, there is a brief loss of connectivity to the I/O Module device since it resets and the
new firmware is displayed on the IOM Firmware and Software page.
Updating I/O Module Infrastructure Device Firmware Using RACADM
To update I/O Module infrastructure device firmware using RACADM, use the fwupdatesubcommand For more
information, see Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide
available at dell.com/support/manuals.
49