Users Guide

Table 36. PSU Status
Item Description
Name/Location Example: PSU1, PSU2, and so on.
Error Messages If no error then "No Errors" is shown; otherwise error
messages are listed, critical errors first, then warnings.
Status Offline, Online, or Standby.
Maximum Wattage Maximum Wattage that PSU can supply to the system.
Table 37. IOM Status
Item Description
Name/Location IOM A
Error Messages If no error then "No Errors" is shown; otherwise error
messages are listed, critical errors first, then warnings.
Status Off or On.
Model Model of the IOM.
Fabric Type Networking type.
IP address Only shows if IOM is turned on. This value is zero for a
pass through type IOM.
Service Tag The factory-assigned service tag.
Table 38. Server Status
Item Description
Example: Server 1, Server 2, etc. Name/Location.
No Errors If there are no errors, then No Errors is displayed;
otherwise error messages are listed. The critical errors
are listed first, and then the warnings. For more
information, see "LCD Error Messages".
Slot Name Chassis slot name. For example, SLOT-01.
NOTE: You can set this table through the CMC CLI or
Web GUI.
Name Name of the server, which the user can set through Dell
OpenManage. The name is displayed only if iDRAC has
finished booting, and the server supports this feature, else
iDRAC booting messages are displayed.
Model Number Displays if iDRAC finished booting.
Service Tag Displays if iDRAC finished booting.
BIOS Version Server BIOS firmware version.
Last POST Code Displays the last server BIOS POST code messages string.
200