Reference Guide

• racadm raid createvd:RAID.ChassisIntegrated.1-1 -rl {r0|r1|

r5|r6|r10|r50|r60} [-wp {wt|wb}] [-rp {nra|ra|ara}] [-ss

{1k|2k|4k|8k|16k|32k|64k|128k|256k|512k|1M|2M|4M|8M|16M}] -

pdkey:<comma separated PD FQDDs>

• [-dcp {enabled|disabled|default}] [-name <VD name>] [-size

<VD size> {b|k|m|g|t}] [-cc]

• racadm raid discardcache:RAID.ChassisIntegrated.1-1

• racadm raid changepolicy:Disk.Virtual.

0:RAID.ChassisIntegrated.1-1 -wp {wt|wb} -rp {nra|ra|ara} -

dcp {enabled|disabled|default} racadm raid

rename:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -name <VD

name>

• racadm raid ctrlprop:RAID.ChassisIntegrated.1-1 [-rebuild

<value>>] [-bgi <value>] [-reconstruct <value>] [-

checkconsistency <value>] [-ccmode {abortonerror | normal}]

[-copybackmode {off | on | onwithsmart}] [-lb {auto |

disabled}] [-prunconfigured {yes | no}] racadm raid

rebuild:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1 racadm raid

cancelrebuild:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1

raid

Description Allows you to execute commands to control RAID arrays.

To use this subcommand for CMC you must have Chassis Administartor privilege.

Synopsis

racadm raid

Example

• Monitor Health of Storage root node

racadm raid get status

Storage Root Node Status : Ok

This command retrieves the controllers keys, (FQDDs.)

• Monitor and Inventory all Controllers connected to the server

racadm raid get controllers

racadm raid get controllers -o

This command is an optimized version and displays the full controller objects along with their keys.

racadm raid get controllers -o -p <property names separated by comma>

This command displays the filtered property values for all returned controller objects.

• Monitor and Inventory all batteries connected to the controller

racadm raid get batteries --refkey <controller FQDDs

separated by comma>

This command displays all battery keys connected to the controllers referred to as refkeys.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o

This command is an optimized version and displays all battery objects for the controller FQDD.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o -p <property names separated by comma>