Reference Guide

– mainboard

– perc

– expander

– hdd

– perc-fqdd, where fqdd is FQDD of the PERC.

– expander-fqdd, where fqdd is FQDD of the Storage Expander.

– hdd-fqdd, where fqdd is FQDD of the HDD.

Example

• Retrieve the version for a server 4

racadm getversion -m server-4

• Retrieve the Lifecycle Controller component versions for servers 1 and 3:

racadm getversion -l -m server-1 -m server-3

• Retrieve the Lifecycle Controller BIOS versions for servers 1 and 3:

racadm getversion -l -m server-1 -m server-3 -f bios

• Retrieve the version for all modules:

racadm getversion

• Retrieve the iDRAC version in all the servers that are attached to the chassis:

racadm getversion -f idrac

ifconfig

Description Displays the contents of the network interface table.

To use this subcommand, you must have Execute

Diagnostic Commands or Configure iDRAC permission.

Synopsis

racadm ifconfig

Example

$ racadm ifconfig

eth0 Link encap:Ethernet HWaddr

00:1D:09:FF:DA:23

inet addr:10.35.155.136

Bcast:10.35.155.255

Mask:255.255.255.0

UP BROADCAST RUNNING

MULTICAST MTU:1500

Metric:1

RX packets:2550665

errors:0 dropped:0 overruns:0

frame:0

TX packets:0 errors:0

dropped:0 overruns:0

carrier:0

collisions:0 txqueuelen:

1000

RX bytes:272532097

(259.9 MiB) TX bytes:0

(0.0 B)