Reference Guide

cfgNetTuningNicSpeed
Description Specifies the speed for the CMC NIC. This property is used
only if cfgNetTuningNicAutoNeg is set to 0.
Legal Values 10, 100, or 1000
Default 100
cfgNetTuningNicAutoneg (Read/Write)
Description Enables autonegotiation of physical link speed and duplex.
If enabled, autonegotiation takes priority over other values
set in this group.
Legal Values
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default 1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
cfgNetTuningNic100MB (Read/Write)
Description Specifies the speed to use for the RAC NIC. This property
is not used if cfgNetTuningNicAutoNeg is set to 0
(disabled).
Legal Values
• 0 (10 MBit)
• 1 (100 MBit)
• 2 (1000 MBit)
Default 1
cfgNetTuningNicFullDuplex (Read/Write)
Description Specifies the duplex setting for the RAC or CMC NIC. This
property is used only if the cfgNetTuningNicAutoNeg is
set to 0 (disabled).
Legal Values
• 0 (Half Duplex)
• 1 (Full Duplex)
Default 1
151