Users Guide

QuickDeploy IP address assignments for servers

The following tables show the way that the QuickDeploy IP addresses assigned to the servers based on

the sleds present in the FX2/FX2s Chassis:

• Two full-width sleds in the chassis:

• Four half-width sleds in the chassis:

• Eight quarter-width sleds in the chassis:

NOTE: The Reserved QuickDeploy IPAddresses must be set to a minimum of 8.

• Four FM120x4 sleds in the chassis:

NOTE: The Reserved QuickDeploy IPAddresses must be set to 16.

• Top row contains only quarter-width sleds and bottom row contains only half-width sleds:

NOTE: The Reserved QuickDeploy IPAddresses must be set to a minimum of 8.

• Top row contains only full-width sleds and bottom row contains only half-width sleds:

• Top row contains full-width sleds and bottom row contains only quarter-width sleds:

NOTE: The Reserved QuickDeploy IPAddresses must be set to a minimum of 8.