Users Guide

17
Configuring PCIe slots
The PowerEdge FX2/FX2s chassis optionally contain eight PCIe slots where each PCIe slot is assigned to a
specific sled. By default, all PCIe slots are mapped. You can enable or disable the assignment of PCIe slots
to the servers using the CMC web interface or RACADM commands.
The following tables list the PCIe mapping for full-width, half-width, and quarter-width compute sleds.
Table 17. PCIe mapping for full-width compute sleds
PCIe Slot Mapping for full-width sleds (PowerEdge FC830)
PCIe slot-1 3
PCIe slot-2 3
PCIe slot-3 1
PCIe slot-4 1
PCIe slot-5 3
PCIe slot-6 3
PCIe slot-7 1
PCIe slot-8 1
Table 18. PCIe mapping for half-width compute sleds
PCIe Slot Mapping for half-width sleds (PowerEdge FC630)
PCIe slot-1 4
PCIe slot-2 4
PCIe slot-3 2
PCIe slot-4 2
PCIe slot-5 3
PCIe slot-6 3
PCIe slot-7 1
PCIe slot-8 1
Table 19. PCIe mapping for quarter-width compute sleds
PCIe Slot Mapping for quarter-width sleds (PowerEdge FC430)
PCIe slot-1 3d
PCIe slot-2 3c
154