Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.20 for Dell PowerEdge FX2

111

112

113

114

115

116

117

118

119

120

下例显示了带有新行的文件。

# # inittab This file describes how the INIT process # should set up the system

in a certain # run-level. # # Author: Miquel van Smoorenburg # Modified for RHS

Linux by Marc Ewing and # Donnie Barnes # # Default runlevel. The runlevels

used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user

mode # 2 - Multiuser, without NFS (The same as 3, if you # do not have

networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do

NOT set initdefault to this) # id:3:initdefault: # System initialization.

si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/

rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/

rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Things to run in

every runlevel. ud::once:/sbin/update # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/

sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we

have a few # minutes of power left. Schedule a shutdown for 2 minutes from now.

# This does, of course, assume you have power installed and your # UPS is

connected and working correctly. pf::powerfail:/sbin/shutdown -f -h +2 "Power

Failure; System Shutting Down" # If power was restored before the shutdown

kicked in, cancel it. pr:12345:powerokwait:/sbin/shutdown -c "Power Restored;

Shutdown Cancelled" # Run gettys in standard runlevels

co:2345:respawn:/sbin/

agetty -h -L 57600 ttyS1 ansi 1:2345:respawn:/sbin/mingetty tty1

2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3

4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/mingetty tty5

6:2345:respawn:/sbin/mingetty tty6 # Run xdm in runlevel 5 # xdm is now a

separate service x:5:respawn:/etc/X11/prefdm -nodaemon

按照以下说明编辑文件 /etc/securetty：

添加新行，带有 COM2 的串行 tty 名称：

ttyS1

以下示例显示带有新增行的示例文件。

vc/1 vc/2 vc/3 vc/4 vc/5 vc/6 vc/7 vc/8 vc/9 vc/10 vc/11 tty1 tty2 tty3 tty4

tty5 tty6 tty7 tty8 tty9 tty10 tty11 ttyS1

使用 iDRAC RACADM 代理管理 CMC

当 CMC 未处于网络上时，可以使用 iDRAC RACADM 代理管理 CMC。下表列出了 CMC 权限与用于代理操

作的 iDRAC 权限之间的映射。

CMC 权限代理操作所需的 iDRAC 权限

CMC 登录用户 iDRAC 登录

机箱配置管理员配置 iDRAC

用户配置管理员在 iDRAC 中配置用户

清除日志管理员日志

机箱控制管理员系统控制

服务器管理员系统控制

测试警报用户系统操作

调试命令管理员调试

118