Reference Guide

cfgDNSServer2 (Read/Write)

Description Retrieves the IPv4 address for DNS server 2. This parameter is only valid if

cfgDNSServersFromDHCP is set to 0 (FALSE).

NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical values

while swapping addresses.

Legal Values String representing a valid IPv4 address. For example: 192.168.0.20.

Default 0.0.0.0

cfgNicEnable (Read/Write)

Description Enables or disables CMC network interface controller. If the NIC is disabled,

the remote network interfaces to CMC are no longer accessible and CMC

are only available through the local or serial RACADM interface.

Legal Values

• 1 (TRUE)

• 0 (FALSE)

Default 1

cfgNicIpAddress (Read/Write)

Description Specifies the static IPv4 address to be assigned to the RAC or CMC.

NOTE: This parameter is only configurable if the cfgNicUseDhcp

parameter is set to 0 (FALSE.)

Legal Values String representing a valid IPv4 address. For example: 192.168.0.20.

Default

192.168.0.120

cfgNicNetmask (Read/Write)

Description The subnet mask used for CMC IP address.

This property is only valid if cfgNicUseDhcp is set to 0 (FALSE).

NOTE: This parameter is only configurable if the cfgNicUseDhcp

parameter is set to 0 (FALSE).

Legal Values String representing a valid subnet mask. For example: 255.255.255.0.

Default 255.255.255.0