Reference Guide

Example

racadm config -g cfgLanNetworking -o

cfgNicVLanPriority 7

cfgDNSDomainNameFromDHCP (Read/Write)

Description Specifies that the DNS domain name should be assigned from the network

DHCP server.

Legal Values

• 1 (TRUE)

• 0 (FALSE)

Default 0

This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgCurrentIPv6Enabled and

cfgIPv6AutoConfig are set to 1 (true).

The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following

properties are set to 1 (true):

• cfgNicIPv4Enable

• cfgNicUseDhcp

• cfgCurrentIPv6Enabled

• cfgIPv6AutoConfig

• cfgDNSDomainNameFromDHCP

• cfgDNSDomainName (Read/Write)

The network administrator must make sure that these DHCP servers are configured to provide the same

DNS domain name to the CMC, otherwise the domain name becomes unpredictable.

cfgDNSDomainName (Read or Write)

Description In the DNS domain name, parameter is only valid if

cfgDNSDomainNameFromDHCP is set to 0 (FALSE).

Legal Values A string of up to 254 ASCII characters. At least one of the characters must be

alphabetic. Characters are restricted to alphanumeric, '-', and '.'.

NOTE: Microsoft Active Directory only supports Fully Qualified Domain

Names (FQDN) of 64 bytes or fewer.

Default

<blank>