Reference Guide

Example Commands for the cfgEmailAlert group:
• Enable the alert —
racadm config -g cfgEmailAlert -o cfgEmailAlertEnable -
i 1
• Set the destination e-mail address —
racadm config -g cfgEmailAlert -o cfgEmailAlertAddress -
i 1 [e-mail]
• Set the custom message that is sent to the destination e-mail address —
racadm config -g cfgEmailAlert -o
cfgEmailAlertCustomMsg -i 1 "This is a test!"
• Make sure that the SMTP IP address is configured properly —
racadm config -g cfgRemoteHosts -o
cfgRhostsSmtpServerIpAddr 192.168.0.152
• View the current e-mail alert settings —
racadm getconfig -g cfgEmailAlert -i <index>
where <index> is a number from 1 to 4.
testfeature
The following tables describe the testfeature subcommand options.
Option Description
-f <feature> Specifies the feature name. testfeature supports the following features:
• ad — Tests Active Directory configuration using simple authentication
(user name and password).
• adkrb — Tests Active Directory configuration using the Kerberos
authentication.
• ldap — Tests LDAP configuration and operation (requires user name and
password).
-u < username > The user name specified in an appropriate format for the selected
authentication method. That is, Active Directory users are specified as
user_name@domain_name.
-p < password > The password for the indicated user account.
-d < bitmask > A bitmask (specified as a hexadecimal value) to select various diagnostic
messaging levels. This option is optional.
NOTE: -d option is not supported with the remote racadm interface.
testfeature -f ad
Description Tests Active Directory configuration using simple authentication (user name
and password). Use the optional -d switch to obtain additional diagnostic
information, as needed.
This subcommand when executed performs the following:
• Checks command syntax.
89