Reference Guide

– Disables IPv6 (w/ -p option)
– Can be specified for chassis or servers
Example
• racadm setniccfg -s 192.168.0.120 255.255.255.0
192.168.0.1
• racadm setniccfg -d
• racadm setniccfg -d6
• Configuration of speed = 100Mbps and duplex= full duplex:
racadm setniccfg -k 100 full
• Configuration of speed and duplex to autonegotiate:
racadm setniccfig -k
• Configuration of redundant mode:
racadm setniccfg -r 1
• Configuration of VLAN id and priority of a slot or all blades in a sleeve:
racadm setniccfg -i 5 -v 1000 7
• Configuration of CMC to a static IPv6 address:
racadm setniccfg -m chassis -s -6 2001:DB8::2 64
2001:DB8::1
• Configuration of server to use stateless autoconfiguration address:
racadm setniccfg -m server-1 -d -6
• Configuration of VLAN id and priority for a switch:
racadm setniccfg -m switch-1 -v 1000 7
• Removal of VLAN configuration from a switch:
racadm setniccfg -m switch-1 -v
no
setractime
Description Sets the date and time on the CMC.
To use this subcommand, you must have the Administrator privilege.
Synopsis
• racadm setractime -d <yyyymmddhhmmss.mmmmmmsoff>
• racadm setractime -l YYYYMMDDhhmmss
• racadm setractime -z {?|timezone|timezone-prefix*}
Input
• -d — Sets the time in the string yyyymmddhhmmss.mmmmmmsoff
where:
— yyyy is the year
— mm is the month
— dd is the day
— hh is the hour
80