Reference Guide

Example
$ racadm ifconfig
eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23
inet addr:10.35.155.136 Bcast:10.35.155.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:2550665 errors:0 dropped:0
overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:1000
RX bytes:272532097 (259.9 MiB) TX bytes:0
(0.0 B)
jobqueue
Description Displays the jobs in that are currently being run, delete the jobs, and create a
job.
NOTE: To view the jobs, you must have CMC Login User privilege.
NOTE: To delete the jobs, you must have Chassis Configuration
Administrator
privilege.
Synopsis
• racadm jobqueue view
• racadm jobqueue delete
• racadm jobqueue create
Input
• —i — Specifies the JobID that is displayed or deleted.
• – –all — The JobIDs that are not applied are deleted.
• <fqdd> — Specifies an FQDD for which a job has to be created.
• reboot type — Specifies a reboot type. Valid options are none: No Reboot
Job which is the default.
• start time — Specifies a start time for job to be scheduled in
yyyymmddhhmmss format. If you specify TIME_NOW, the job is
immediately run.
• Expiration time — Specifies the expiry time for the job to complete in
yyyymmddhhmmss format. If you specify TIME_NA, the wait-time is not
applicable for the job.
Example
• Display all the jobs:
-------------------------JOB
QUEUE------------------------
[Job ID=RID_853106266329]
Job Name=Reboot4
Status=New
Start Time=[NOW]
Expiration Time=[NOW]
--------------------------------------------------------
64