Reference Guide

Displays the slot name for all the four slots in the chassis.

• -i < slotNum > - specifies the slot number.

Values: 1 to 4

• -h - Specifies whether to display the slot name or the host name (if

available). 1 displays host names and 0 displays slot names.

Example

• Display all slots names.

racadm getslotname

1 SLOT-01

2 Webserver01 WXP-8GRB221

3 Webserver3 WXP-319QWEecet5

4 SLOT-04

• Display the name of the third slot.

racadm getslotname -i 3

• Verify if the option (1 is Active) for displaying host names is set.

getsensorinfo

Description

Displays status of chassis sensors.

NOTE: To use this subcommand, you must have CMC Login User

privilege.

Synopsis

racadm getsensorinfo

Examples

racadm getsensorinfo

Sensor Type : Voltage

<Sensor Name> <Status> <Reading> <LC> UC

CPU1 VCORE PG OK 0 600 N/A

System Board

12V PG

OK 0 600 N/A

System Board

3.3V PG

OK 4037 600 N/A

System Board

5V PG

OK 4045 600 N/A

CPU1 PLL PG OK 4107 600 N/A

System Board

1.5V PG

OK 0 600 N/A

System Board

1.1V PG

OK 0 600 N/A

CPU1 M01 VTT PG OK 0 600 N/A