Reference Guide

20051208201542.000000

getsel

Description Displays all sensor event log entries in the DRAC.

Synopsis

• racadm getsel -i [-A]

• racadm getsel [-s <start>] [-c <count>] [-A] [-o] [-E] [-R] [--more]

If no arguments are specified, the entire log is displayed.

Input

• -A — Specifies output with no display headers or labels.

• -c — Provides the number of records to be displayed.

• -o — Displays each entry in the SEL in a single line.

• -s — Specifies the starting record used for the display.

• -E — Displays RAW SEL data with the other data for each entry.

• -R — Displays only RAW SEL data for each entry.

• -i — Displays the number of entries in the SEL.

• --more — Displays one screen at a time and prompts the user to continue

(similar to the UNIX more command.)

NOTE: The -A, -E, -o, and -R options are deprecated.

Output

Record: 12

Date/Time: 11/20/2011 14:19:34

Source: system

Severity: Ok

Description: C: boot completed.

Example

racadm getsel

getslotname

Description

Displays the name and host name (if available) of all the four slots, or of a

specified slot (indicated by the slot number) in the chassis. Optionally, use this

command to find if the slot name or host name is displayed in the CMC Web

interface, or with the getslotname [-i <slotNum> | -h] command. If the host

name is not available, the static slot name is used.

To use this subcommand, you must have CMC Login User privilege.

Synopsis

• racadm getslotname

• racadm getslotname [-i <slotNum> | -h]

• racadm getslotname -h

Input

• None -