Reference Guide

<module> <LED state> server-4 Blinking

• racadm getled -m chassis

<module> <LED state> server-4 Not blinking

• racadm getled -m server-1

<module> <LED state> server-1 ON

• racadm getled -m server-1

<module> <LED state> server-1 Extension(1)

getmacaddress

Description Displays the MAC/WWN addresses for all modules or for a specified module.

The decoder values in the Type column indicate the protocols of the network

cards.

• 0— Unsupported

• 1— ISCSI

• 2— FCoE-FIP

• 3— iSCSI/FCoE-FIP

To use this subcommand, you must have the CMC Login User privilege.

Synopsis

• racadm getmacaddress

• racadm getmacaddress -m chassis

• racadm getmacaddress -m switch-<n>

• racadm getmacaddress [-m <module>] [-t iscsi] [-x]

• racadm getmacaddress [-a]

• racadm getmacaddress -c IO-Identity

• racadm getmacaddress -c Flexaddress

• racadm getmacaddress -c Factory

• racadm getmacaddress -c all

Input

• -m < module > — Specifies the module whose MAC address you want to

view.

< module > may be one of the following:

server-n , where n=1–4

switch-n , where n=1–2

• -t — Displays the iSCSI MAC addresses for all servers or the specified

server if used with -m option.

• -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional

LOM MACs and must be used with -m option.

• -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/

LOMs/mezzanine cards. When FlexAddress is enabled for a particular slot,

then the chassis-assigned MAC/WWN address is displayed.

• -c— Displays the Ethernet, iSCSI, MAC/WWN, assignment type, and

partition status of all LOMs or mezzanine cards. Valid values for -c option

are:

– IO-Identity — Displays the user-defined MAC/WWN addresses.