Reference Guide

10 GbE

00:90:FA:

51:31:F1

F0:1F:AF:88:22:7E(active)

NOTE: 10 GbE KR/3 — The value 3 indicates the protocol type.

getioinfo

Description Displays general information about the I/O modules on the chassis.

To use this subcommand, you must have the CMC Login User privilege.

NOTE: The fabric type may be any supported I/O fabric type, such as

Ethernet, Fiber Channel, and Infiniband.

Synopsis

racadm getioinfo

Example

racadm getioinfo

switch-1 N/A None Not

Present

N/A N/A N/A

switch-2 PE 10

Gigabit KR

Present OK ON Master

getled

Description Displays the LED settings on a module: blinking, not blinking, or unknown

(for empty slots).

To use this subcommand, you must have the Login User privilege.

Synopsis

racadm getled -m <module>

Input CMC only options:

-m < module > — Specifies the module whose LED settings you want to

view.

< module > can be one of the following:

• server-n where n=1 or 4

• switch-n where n=1 or 2

• chassis

• CMC active

Example For CMC:

• racadm getled -m server-4