Reference Guide

Example
racadm getchassisname
CMC-1
getconfig
Description Retrieves CMC configuration parameters individually, or all CMC
configuration groups may be retrieved and saved to a file.
Synopsis
• racadm getconfig -f <filename>
• racadm getconfig -g <groupName> [-I <index>]
• racadm getconfig -u <username>
• racadm getconfig -h
• racadm getconfig -g <groupName> -o <objectName> [-i index]
Input
• -f — The -f <filename> option directs getconfig to write the entire CMC
configuration to a configuration file. This file can be used for batch
configuration operations using the config subcommand.
• -g — The -g <groupName>, or group option, can be used to display the
configuration for a single group. The groupName is the name for the
group used in the racadm.cfg files. If the group is an indexed group, use
the -i option.
• -h — The -h, or help option, displays a list of all available configuration
groups in alphabetical order. This option is useful when you do not have
exact group names.
• -i — The -i <index>, or index option, is valid only for indexed groups and
can be used to specify a unique group. The <index>is a decimal integer
from 1 through n, where n can vary from 1 to maximum number of
indexes a particular group supports. If -i <index> is not specified, a value
of 1 is assumed for groups, which are tables that have multiple entries.
The index is specified by the index value, not a named value.
• -m — Indicates the module on which you want to carry out the action.
The —m or <module> displays the following information for a particular
server, group of servers, individual storage, or storage groups:
– session
– WEB/SSH/Telnet
– remote system log
– storage mode
– service tag
– asset tag
The <module> must have one of the following values:
– server-<n> — where n = 1 to 4
– server-<nx> — where n = 1 to 4 and x = a to d (lower case). The n = 2
and 4 are valid for multi-node sleds only.
– storage-<n> — where n = 1 to 4
NOTE: The -m option is available only for cfgRemoteHosts,
cfgRacTuning, cfgSerial, cfgSessionManagement,
cfgLanNetworking, and cfgIPv6LanNetworking commands.
• -o — The -o <objectname> or object option specifies the object name
that is used in the query. This option is optional and can be used with the
-g option.
34