Reference Guide

NOTE: This input is available in IOA only.

• -q— Displays or modifies the quick deploy parameters.

• -n— Specifies the number of reserved IP addresses for quick deploy. The

valid values are 2 and 4.

Output None

Example

• racadm deploy -m server-8 -s 192.168.0.20 255.255.255.0

192.168.0.1

The server was deployed successfully.

The deploy command generates an error when used on the extension

slot of a multi-slot server.

• racadm deploy -m server-9 192.168.0.11 255.255.255.0

192.168.0.1

ERROR: Server in slot 9 is an extension of the server in slot 1.

• rracadm deploy -m server-7 -u root -p <default root

user password> -s -6 ::/64 :: 10

eventfilters

Description

Gets, sets, and displays the list of event filter settings.

To use this subcommand with the get option, you must have the CMC Login

User privilege.

Synopsis

• racadm eventfilters <eventfilters command type>

• racadm eventfilters get -c <alert descriptor>

• racadm eventfilters set -c <alert descriptor>-n <notifications>

• racadm eventfilters set -c <alert descriptor>-r <recurrence>

NOTE: The general format of an alert descriptor:

cmc.alert.category.[subcategory].[severity]

where, category is mandatory, but subcategory and severity are

optional. A severity cannot precede a subcategory.

Valid category values are:

• System

• Config

• Updates

• Audit

Valid severity values are:

• Critical

• Warning

• Informational

Valid examples of alert descriptors are:

• cmc.alert.all