Reference Guide

NOTE: It is recommended that you use Firmware RACADM to run this
subcommand.
Synopsis
racadm chassislog view -i <nNumber of records> -c <log
type> -s <severity> -q <sequence no.> -n <number of
records> -r <start timestamp> -e <end timestamp>
Input
• -i — Displays the number of records present in the active log. You
cannot use this option with any other option.
• -c — The log type to filter the records. Provide multiple categories using
a "," as the delimiter. The value is case-insensitive. Valid Category values:
– All
– System
– Updates
– Audit
– Config
• -q - The sequence number from which the records must be displayed.
• -n - Specifies the n Number of records to be displayed.
• -r - Displays events that have occurred after this time. The time format is
yyyy-mm-dd HH:MM:SS. The time stamp must be provided within
double quotes.
• -e - Displays events that have occurred before this time. The time format
is yyyy-mm-dd HH:MM:SS. The time stamp must be provided within
double quotes.
• -s — The severity used to filter the records. Provide multiple severities
using a "," as the delimiter. The value is case-insensitive. Valid Severity
values:
– 1. Warning
– 2. Critical
– 3. Info
NOTE: To view or export the Chassis log, only CMC Login User
permission is required.
Example
• Display the number of records present in the Chassis Log:
racadm chassislog view -i
• Display the records having severities set to warning or critical, starting
from sequence number 4:
racadm chassislog view -s warning,critical -q 4
• Display 5 records starting from sequence number 20:
racadm chassislog view -q 20 -n 5
• Display all records of events that have occurred between 2011-01-02
23:33:40 and 2011-01-03 00:32:15:
racadm chassislog view -r "2011-01-02 23:33:40" -e
"2011-01-03 00:32:15"
• Display all the available records from the active Chassis log:
racadm chassislog view -n all
• Display the last 25 records from the Chassis log:
racadm chassislog view
20