Reference Guide

cfgADDcSRVLookupEnable (Read/Write)
Description Configures CMC to use pre‑configured domain controllers or to use DNS to
find the domain controller. If using pre‑configured domain controllers, then
the domain controllers to use are specified under cfgAdDomainController1,
cfgAdDomainController2, and cfgAdDomainController3. CMC does not fail
over to the specified domain controllers when DNS lookup fails or none of
the servers returned by the DNS lookup works.
Legal Values
• 1 (TRUE)—use DNS to look up domain controllers
• 0 (FALSE)—use pre‑configured domain controllers
Default 0
cfgADSpecifyServerEnable
Description Allows you to enable or disable and specify an LDAP server or a global
catalog server. Use cfgADDomainController or cfgADGlobalCatalog to
specify the IP address.
Legal Values
• 1 (enabled)
• 0 (disabled)
Default 0
cfgLDAP
This group allows you to configure settings related to the Lightweight Directory Access Protocol (LDAP).
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgLDAP group.
cfgLdapEnable (Read/Write)
Description Turns LDAP service on or off.
If this property is disabled, local CMC authentication is used for user logins.
NOTE: For CMC, enabling this option turns off cfgADEnable.
Legal Values
• 1 (TRUE)— Enable
• 0 (FALSE)— Disable
Default 0
123