Users Guide

Fabric-A ethernet disabled
Fabric-B iSCSI enabled
Fabric-C fiber channel enabled
l racadm getflexaddr -i 1
Ranura-1 flexaddress activada = 1
<Estructura de red> <Tipo> <Asignada por el servidor>
<Asignada por el chasis>
slot1-A1 Gigabit Ethernet 00:1C:23:CD:AC:D2(active)
00:1E:C9:FF:E3:21
iSCSI 00:1C:23:CD:AC:D3(active)
00:1E:C9:FF:E3:22
slot1-A2 Gigabit Ethernet 00:1C:23:CD:AC:D4(active)
00:1E:C9:FF:E3:23
iSCSI 00:1C:23:CD:AC:D5(active)
00:1E:C9:FF:E3:24
slot1-B1 Gigabit Ethernet 00:1D:09:71:B3:60
00:1E:C9:FF:E3:25(active)
iSCSI 00:1D:09:71:B3:61
00:1E:C9:FF:E3:26(active)
slot1-B2 Gigabit Ethernet 00:1D:09:71:B3:62
00:1E:C9:FF:E3:27(active)
iSCSI 00:1D:09:71:B3:63
00:1E:C9:FF:E3:28(active)
slot1-C1 Fiber Channel 4 10:00:00:00:C9:63:51:0E
20:01:00:1E:C9:FF:E3:29(active)
slot1-C2 Fiber Channel 4 10:00:00:00:C9:63:51:0D
20:02:00:1E:C9:FF:E3:29(active)
getioinfo

Descripción
MuestrainformacióngeneralsobrelosmódulosdeE/Sdelchasis.

Uso
racadm getioinfo

Ejemplo
racadm getioinfo
<E/S><Nombre><Tipo><presencia><POST><Alimentación>
switch-1EthernetPassthroughGigabitEthernetPresent
OK ON
switch-2N/ANoneNotPresent
N/A N/A
switch-3N/ANoneNotPresent
N/A N/A
switch-4N/ANoneNotPresent
N/A N/A
switch-5N/ANoneNotPresent
N/A N/A
switch-6N/ANoneNotPresent
N/A N/A
getkvminfo
NOTA: Para utilizar este subcomando debe contar con privilegios de Usuario con acceso al CMC.
NOTA: El tipo de estructura de red puede ser cualquier de cualquier tipo de estructura de red de E/S admitido, como Ethernet, Fiber Channel o
Infiniband.