Users Guide


示例
racadm getniccfg
NIC Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 10.35.155.160
Current Subnet Mask = 255.255.255.0
Current Gateway = 10.35.155.1
Speed = Autonegotiate
Duplex = Autonegotiate
l racadm getniccfg -m server-1
DHCP Enabled = 0
IP Address = 192.168.0.135
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
l racadm getniccfg -m server-9
"ERROR: Server in slot 9 is an extension of the server in slot 1."
（错误：插槽 9 中的服务器是插槽 1 中服务器的扩展。）
getpbinfo

说明
显示电源预算状况信息。

用途
racadm getpbinfo

示例
racadm getpbinfo
[PowerBudgetStatus]
SystemInputPower=700W
PeakSystemPower=0W
PeakSystemPowerTimestamp=01:08:2309-1-27
MinimumSystemPower=0W
MinimumSystemPowerTimestamp=20:18:3000-1-27
OverallPowerHealth=NotOK
Redundancy=No
SystemInputPowerCap=7928W
RedundancyPolicy=None
DynamicPSUEngagementEnabled=No
SystemInputMaxPowerCapacity=0W
InputRedundancyReserve=0W
InputPowerAllocatedtoServers=0W
InputPowerAllocatedtoChassisInfrastructure=51watts
TotalInputPowerAvailableforAllocation=0W
StandbyInputPowerCapacity=0W
[ChassisPowerSupplyStatusTable]
<Name><Presence><PowerState><InputCurrent><InputVolts><OutputRating>
PS1 Online On 16.1 A 32 V
-m < 模块 >
指定要查看其网络设置的模块。
< 模块 >可以是以下任一值：
l 机箱
l server-n 其中 n=1C16
l switch-n 其中 n=1C6
默认：chassis
注： 要使用此子命令，必须具有"CMC Login User"（ CMC 登 录 用）权限。