User's Manual

Using the RACADM Command Line Interface 73
getsysinfo Displays general CMC and system information.
gettracelog (Dell internal
use only)
Displays the CMCtrace log. If used with the -i option,
the command displays the number of entries in the CMC
trace log.
ifconfig Displays the current CMC IP configuration.
netstat Displays the routing table and the current connections.
ping Verifies that the destination IP address is reachable from
the CMC with the current routing-table contents.
racdump Displays the comprehensive chassis status and
configuration state information, as well as historic event
logs. Used for post deployment configuration verification
and during debugging sessions.
racreset Resets the CMC.
racresetcfg Resets the CMC to the default configuration.
serveraction Performs power management operations on the managed
system.
setassettag Sets the asset tag for the chassis.
setchassisname Sets the name of the chassis.
setflexaddr Enables/disables FlexAddress on a particular slot/fabric,
when the FlexAddress feature is activated on the chassis
setled Sets the LED settings on a module.
setniccfg Sets the IP configuration for the controller.
setractime Sets the CMC time.
setslotname Sets the name of a slot in the chassis.
setsysinfo Sets the name and location of the chassis.
sslcertdownload Downloads a certificate authority-signed certificate.
sslcertupload Uploads a certificate authority-signed certificate or server
certificate to the CMC.
sslcertview Views a certificate authority-signed certificate or server
certificate in the CMC.
Table 4-1. RACADM Subcommands (continued)
Command Description