User's Manual

414 CMC Property Database Group and Object Definitions
# cfgChassisPeakPowerTimestamp
Read only. The timestamp recorded when the peak system power value
occurred.
# cfgChassisMinPower
Read only. The minimum system level power consumption value (in watts)
over the time since the value was last cleared.
# cfgChassisMinPowerTimestamp
Read only. The timestamp recorded when the minimum system power
occurred.
# cfgChassisPowerStatus
Read only. Indicates the power status of the chassis.
Configuration options: 1 (other), 2 (unknown), 3 (OK), 4 (non-critical), 5
(critical), 6 (non-recoverable)
# cfgChassisRedundantState
Read only. Enables or disables power redundancy for the chassis.
Values: 0 (none), 1 (full)
cfgChassisPowerCap
Indicates the maximum power consumption limit (in watts) for the entire
chassis. The command will generate an error if blade throttling is necessary to
achieve the power goal based on the value for this setting.
Configuration range: 2768–7928 watts
Default: 7928 watts
cfgChassisPowerCapF
Indicates the maximum power consumption limit (in watts) for the entire
chassis. Use cfgChassisPowerCapF when power consumption is to be
changed regardless of whether blade throttling is required.
Configuration range: 2768–7928 watts
Default: 7928 watts