User's Manual

374 RACADM Subcommands

Examples

•

racadm setniccfg -m server-1 143.166.152.39

143.166.152.1 255.255.255.0

•

racadm setniccfg -m server-9 143.166.152.39

143.166.152.1 255.255.255.0

ERROR: Server in slot 9 is an extension of the

server in slot 1.

•

racadm setniccfg -k 100 full

Speed and Duplex settings modified successfully.

setractime

NOTE: To use this subcommand, you must have Administrator privilege.

Description

Sets the date and time on the CMC.

-s Enables static IP settings by specifying the IP address, subnet

mask, and gateway. <ipAddress>, <netmask>, and

<gateway> must be typed as dot-separated strings.

If this option is not supplied, the existing static settings are

used.

-o Disables the Ethernet management port completely.

-k Specifies the speed and duplex for the NIC.

• Speed:

100

• Duplex:

half

full

• (no value supplied): Autonegotiate

Table A-31. setniccfg Subcommand Options (continued)

Option Description