User's Manual

RACADM Subcommands 367
• racadm racreset hard
Executes a hard reset sequence on the CMC.
racresetcfg
NOTE: To use this subcommand, you must have Administrator privilege.
NOTE: Power off the chassis before running this command.
Description
Removes all database property entries on the CMC or iKVM and restores the
default factory configuration. After restoring the database properties, the
CMC resets automatically. The iKVM also resets automatically when
racresetcfg is used to restore its default properties.
NOTICE: This command deletes your current CMC configuration and resets the
CMC and serial configuration to the original default settings. After reset, the default
name and password are root and calvin, respectively, and the IP address is
192.168.0.120. If you issue racresetcfg from a network client (for example, a
supported Web browser or Telnet/SSH), you must use the default IP address.
Usage
racadm racresetcfg [-m < module >]
Options
Table A-26 describes the racresetcfg subcommand options.
Table A-26. racresetcfg Subcommand Options
Option Description
-m <module> Specifies the module whose database properties you want to
reset.
<module> may be any of the following:
• chassis
• kvm
• server -n where n=1 - 16
Default: chassis