User's Manual

RACADM Subcommands 359
"15" "143.166.152.39" "143.166.152.1"
"255.255.255.0" "1" "00:11:43:FD:B4:39" "0.0.0.0"
"0.0.0.0" "0" "1" "cmc-51186" ""
gettracelog
NOTE: This command is for Dell internal use only.
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the diagnostic trace log for the CMC. The default output display
shows the record number, timestamp, source, and description. The
timestamp begins at midnight, January 1 and increases until the system
boots. During system boot, the timestamp displays as <system boot>.
After the system boots, the system’s timestamp is used.
Usage
racadm gettracelog [-i]
racadm gettracelog [-s <
start record >] [-c < count >]
[-m]
Options
Table A-24 describes the gettracelog subcommand options.
Table A-24. gettracelog Subcommand Options
Option Description
(none) Displays the CMC trace log.
-s Specifies the starting record to display.
-c Specifies the number of records to display.
-i Displays the number of entries in the CMC trace log.
-m Displays one screen of information at a time and prompts the user to
continue to next screen (similar to the UNIX more command).