User's Manual

330 RACADM Subcommands
NOTE: Wait for the file to finish transferring from the TFTP server before you check
the status of the update.
NOTE: When using FTP, if the full path to the image file is provided on the CLI, then
that path is used to locate that file on the host. If a path is not provided, then the
home directory of the specified user is searched for the file if the host system is
running Linux or some other variant of UNIX. If the host system is running Windows,
the a default folder (like ftproot) is searched.
Table A-8. fwupdate Subcommand Options
Option Description
-d <path> Specifies the source path where the firmware image resides.
Default: local directory on CMC if -g option is absent. If -g is
used, defaults to directory configured on the TFTP server
-g Downloads the firmware update using the TFTP server.
-u Performs firmware update operation (used with -g).
-a <tftp server ip
address>
Specifies the TFTP server IP address used for the firmware image
(used with -g).
-f <ftp server ip
address>
<username>
<password>
Specifies the FTP server IP address used for the firmware image,
along with the username and password. Can only be used with
CMC, iKVM, and server iDRAC target devices.
-m <target> Specifies the target, or device, to be updated. <target> is one of
the following values:
• cmc-active (default)
•
cmc-standby
• kvm
• server- n where n = 1–16
•
iomifn- n where n = 1–6
NOTE: The cmc-active and cmc-standby targets can be
entered together, as well as one or more
server-n, and one or
more
iomifn-n targets so that those devices can be updated
together.
-s Displays the current status of the firmware update.
-c Cancels the current firmware update.