User's Manual

304 Troubleshooting and Recovery
Using RACADM
1 Open a Telnet/SSH text console to the CMC and log in.
2 To view the hardware log, type:
racadm getraclog
To clear the hardware log, type:
racadm clrraclog
Firmware Update Error Codes
The CMC log can also display error codes as part of the log information. The
table below contains the firmware update CMC log error codes.
Table 11-10. Firmware Update Error Codes
Error Class Error Value (Hex) Error Value (Decimal)
ERR_NO_PRIVILEGE 0x1400 5120
ERR_LOC_CMC_STATE 0x1401 5121
ERR_INV_TARG_LINK 0x1402 5122
ERR_ILLEGAL_CMC_STATE 0x1403 5123
ERR_MX_NULL_PARAM 0x1404 5124
ERR_CLASS_UNSUPPORTED 0x1405 5125
ERR_INAPPROPRIATE_REQUEST 0x1406 5126
ERR_MX_BAD_PARAM 0x1407 5127
ERR_INVALID_TARGET 0x1408 5128
ERR_URL_NOT_FOUND 0x1409 5129
ERR_CANCEL_PID_KILL 0x140A 5130
ERR_REROUTE_PEER 0x140B 5131
ERR_BAD_URL 0x140C 5132
ERR_PAYLOAD_TOO_BIG 0x140D 5133
ERR_BAD_IP_CONV 0X140E 5134
ERR_BAD_HDR_PARAM 0x140F 5135
ERR_BAD_FILENAME 0x1410 5136
ERR_TARGET_NOT_READY 0x1411 5137