User's Manual

302 Troubleshooting and Recovery
To clear the hardware log:
Click Clear Log.
NOTE: The CMC creates a new log entry indicating that the log was cleared.
Using RACADM
1 Open a Telnet/SSH text console to the CMC and log in.
2 To view the hardware log, type:
racadm getsel
To clear the hardware log, type:
racadm clrsel
Table 11-8. Hardware Log Information
Item Description
Severity OK Indicates a normal event that does not require
corrective actions.
Informational Indicates an informational entry on an event in
which the Severity status has not changed.
Unknown Indicates a noncritical event for which
corrective actions should be taken soon to
avoid system failures.
Warning Indicates a critical event requiring immediate
corrective actions to avoid system failures.
Severe Indicates a critical event that requires
immediate corrective actions to avoid system
failures.
Date/Time Indicates the exact date and time the event occurred (for example,
Wed May 02 16:26:55 2007). If no date/time appears, then the
event occurred at System Boot.
Description Provides a brief description, generated by the CMC, of the event
(for example, Redundancy lost, Server inserted).