User's Manual

300 Troubleshooting and Recovery
Using RACADM
Open a Telnet/SSH text console to the CMC, log in, and type:
racadm getmodinfo
Viewing the Event Logs
The Hardware Log and CMC Log pages display system-critical events that
occur on the managed system.
Viewing the Hardware Log
The CMC generates a hardware log of events that occur on the chassis. You
can view the hardware log using the Web interface and remote RACADM.
NOTE: To clear the hardware log, you must have Clear Logs Administrator
privilege.
Warning Indicates that only Warning alerts have been issued, and
corrective action must be taken within the time frame
set by the administrator. If corrective actions are not
taken within administrator-specified time, it could lead
to a component failure, communication failure between
the component and the CMC, and a critical or severe
failure that could affect the integrity of the chassis.
Severe Indicates that at least one failure alert has been issued.
This means that the CMC can still communicate with
the component and that the health status reported is
critical. Corrective action must be taken immediately.
Failure to do so may cause the component to fail and
stop communicating with the CMC.
Unknown Displays when the chassis is first powered on. All chassis
components initially are indicated as "unknown" until
they are fully powered on.
No Value Indicates that the component is absent from the slot, or
the CMC cannot communicate with the component.
NOTE: It is not possible for the chassis to be absent.
Table 11-7. Health Status Indicators (continued)
Item Description