User's Manual

Troubleshooting and Recovery 295
Executing a Power Control Operation
For instructions on powering on, powering off, resetting, or power-cycling the
system using the CMC Web interface or RACADM, see "Executing Power
Control Operations on the Chassis" on page 241, "Executing Power Control
Operations on an IOM" on page 242, and "Executing Power Control
Operations on a Server" on page 243.
Viewing Chassis Summaries
The CMC provides rollup overviews of the chassis, primary and standby
CMCs, iKVM, fans, temperature sensors, and I/O modules (IOMs).
Using the Web Interface
To view summaries of the chassis, CMCs, iKVM, and IOMs:
1
Log in to the CMC Web interface.
2 Select Chassis in the system tree.
3 Click the Summary tab. The Chassis Summary page displays.
Table 11-3, Table 11-4, Table 11-5, and Table 11-6 describe the information
provided.
Table 11-3. Chassis Summary
Item Description
Name
Displays the name of the chassis. The name identifies the
chassis on the network. For information on setting the name
of the chassis, see "Editing Slot Names" on page 99.
Model
Displays the chassis model or manufacturer. For example,
PowerEdge 2900.
Service Tag
Displays the service tag of the chassis. The service tag is a
unique identifier provided by the manufacturer for support
and maintenance.
Asset Tag
Displays the asset tag of the chassis.
Location
Displays the location of the chassis.
CMC Failover Ready
Indicates (Yes, No) whether the standby CMC (if present) is
capable of taking over in the event of a failover condition.